Founded in 2005, the company is a wholly-owned private enterprise, specializing in the processing of diamond abrasives, annual processing of diamond abrasives more than 6,500 tons.

Annual processing of 6500 tons of diamond abrasives.The annual output of granularity sand #12-#220 is 4500 tons, and the annual output of micro powder #240-#3000 is 2000 tons.

High cleanliness, high packing density and high purity are the three elements of high-grade abrasives (three high abrasives), and the "three highs" reflect the high quality and high grade of abrasives. The "three highs" reflect the high quality and high grade of the abrasives, and the enterprise products are positioned as high-grade diamond abrasives.

a. Crushing Put 0-30mm raw material into the mill, grind it into 240 mesh-0 powder, and then through the airflow classifier, the 240 mesh-0 powder is divided into three sections. The powder is divided into three sections. They are 240-600 mesh; 800-1500 mesh; 2000-3000 mesh. b、Acid washing, pure water fine rinsing 240-600 mesh; 800-1500 mesh; 2000-3000 mesh powder were put into the corresponding plastic tank, plus acid immersion Stir the reaction at regular intervals, guide to other plastic tanks to remove carbon after the reaction is completed, and change the water several times to make the aqueous solution neutral, and finally change to pure water rinsing, until it is clean. Finally, rinse with pure water until the cleanliness and chemical composition are qualified. c、Pure water overflow sub-number Rinse 240-600 mesh; 800-1500 mesh; 2000-3000 mesh powder into the corresponding overflow tank, respectively. Adjust the flow rate of pure water separately, carry out the overflow method of numbering, and each particle size flows into the corresponding finished product pool. d、Drying, fine screening Finished products in the pool will be single number out of the pool, single number drying and sieving over large particles.